Author |
Title of the paper |
ID |
Raad, J. | Performance Evaluation of Concrete Structures Reinforced by Corrosion Free FRP and SMA Materials | 97 |
Raad, J. | Collapse Analysis of Concrete Frame Structures Subjected to Extreme Loading | 98 |
Rabaiotti, C. | Structural health monitoring of airfield pavements using distributed fiber - optics sensing | 133 |
Rabinovitch, O. | Dynamic modeling challenges in strengthening existing structures with advanced composites | KNOR |
Rahman, M.K. | Flexural Response of RC Beams Strengthened using UHPFRC Panels Epoxied to the Sides | 230 |
Rahman, M.K. | Evaluation of Performance of RC Beam – Column Joint Externally Strengthened with Steel Strips | 271 |
Rahman, M.K. | Structural Performance of Innovative Precast Hollow Concrete Walls for Buildings | 272 |
Ramaglia, G. | Effect of FRCM properties on masonry out of plane strengthening | 212 |
Rangan, V.R. | Bond strength of fly ash geopolymer with CFRP fabric after exposure to high temperature | 232 |
Ravazdezh, F. | Stress - strain Response of Steel - FRP Confined Concrete Columns Determined by DIC | 206 |
Reda Taha, M.M. | Carbon nanoparticles to monitor moisture damage propagation in GFRP | 246 |
Reda, M. | Behavior of Retrofitted Concrete Members Using Iron-Based Shape Memory Alloys | 157 |
Reuland, Y. | Usefulness of ambient-vibration measurements for seismic assessment of existing structures | 162 |
Rezaiee-Pajand, M. | An edge cracked frame finite element for analysis of cracked structures and inverse crack detection | 32 |
Rezazadeh, M. | Modeling the bond of GFRP and concrete based on a damage evolution approach | 254 |
Ribas, C. | Active shear strengthening of RC beams using shape memory alloys | 77 |
Ricci, F. | A New Concept for Sustainable Refurbishment of Existing Bridges Using FRP Materials | 33 |
Rius, J. | Active shear strengthening of RC beams using shape memory alloys | 77 |
Rizzo, M. | Study of SPM monitoring improvement | 196 |
Rojob, H. | New anchorage mechanism for smooth Fe-SMA bar used for flexural strengthening of RC beams using NSM technique | 355 |
Romer, F.P. | Preliminary estimates of the viability of UAV - based bridge inspections in Switzerland | 55 |
Rossini, M. | Design of CFRP pre-stressed double-tee girders and experimental behavior under service load | 89 |
Rousakis, T. | Use of polymer flexible joint between RC frames and masonry infills for improved seismic performance | 179 |
Rucevskis, S. | Vibration-based damage identification in railway concrete sleepers | 193 |
Ruffini, L. | Infrastructure management integrating SHM and BIM procedures | 293 |
Rück, P. | Natural stone floors monitoring – inference on persistence of humidity spots | 73 |
Rückschloss, M. | Determining Moisture in Materials and IoT | 152 |